-
Cartridge heater
Cartridge heater is a piece of equipment, made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr2080), High temperature leads, seamless stainless steel sheath(304,321,316,800,840). usually in tube form, that is used in heating applications by way of insertion into metal blocks via a series of drilled holes. Cartridge heaters are manufactured in two basic forms – high density and low density.
High density cartridge heaters are used to heat plastic injection moulds, dies, platens and so forth, whereas low density cartridge heaters are more suitable for packing machinery, heat sealing, labelling machines and hot stamping applications.industrial heater
Cartridge heaters
Resistance heating wire
NiCr 80/20 wire
sheath
stainless steel 304,321,316, Incoloy 800, Incoloy 840
Maximum temperature
800 degree Celsius
Wattage Tolerance
+5%, -10%
Resistance tolerance
+10%, -5%
Voltages available
380V,240V, 220V,110V,36V,24V or 12V
Length tolerance
±1 mm
Diameter tolerance
-0.02mm
Standard Cold Zone
5-10mm
Insulation resistance (cold)
≥ 500 MΩ
Maximum leakage current (cold)
≤ 0.5 mA
-
Cartridge heater
Cartridge heater is a piece of equipment, made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr2080), High temperature leads, seamless stainless steel sheath(304,321,316,800,840). usually in tube form, that is used in heating applications by way of insertion into metal blocks via a series of drilled holes. Cartridge heaters are manufactured in two basic forms – high density and low density.
High density cartridge heaters are used to heat plastic injection moulds, dies, platens and so forth, whereas low density cartridge heaters are more suitable for packing machinery, heat sealing, labelling machines and hot stamping applications.industrial heater
Cartridge heaters
Resistance heating wire
NiCr 80/20 wire
sheath
stainless steel 304,321,316, Incoloy 800, Incoloy 840
Maximum temperature
800 degree Celsius
Wattage Tolerance
+5%, -10%
Resistance tolerance
+10%, -5%
Voltages available
380V,240V, 220V,110V,36V,24V or 12V
Length tolerance
±1 mm
Diameter tolerance
-0.02mm
Standard Cold Zone
5-10mm
Insulation resistance (cold)
≥ 500 MΩ
Maximum leakage current (cold)
≤ 0.5 mA
-
Cartridge heater
Cartridge heater is a piece of equipment, made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr2080), High temperature leads, seamless stainless steel sheath(304,321,316,800,840). usually in tube form, that is used in heating applications by way of insertion into metal blocks via a series of drilled holes. Cartridge heaters are manufactured in two basic forms – high density and low density.
High density cartridge heaters are used to heat plastic injection moulds, dies, platens and so forth, whereas low density cartridge heaters are more suitable for packing machinery, heat sealing, labelling machines and hot stamping applications.industrial heater
Cartridge heaters
Resistance heating wire
NiCr 80/20 wire
sheath
stainless steel 304,321,316, Incoloy 800, Incoloy 840
Maximum temperature
800 degree Celsius
Wattage Tolerance
+5%, -10%
Resistance tolerance
+10%, -5%
Voltages available
380V,240V, 220V,110V,36V,24V or 12V
Length tolerance
±1 mm
Diameter tolerance
-0.02mm
Standard Cold Zone
5-10mm
Insulation resistance (cold)
≥ 500 MΩ
Maximum leakage current (cold)
≤ 0.5 mA
-
Cartridge heater
Cartridge heater is a piece of equipment, made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr2080), High temperature leads, seamless stainless steel sheath(304,321,316,800,840). usually in tube form, that is used in heating applications by way of insertion into metal blocks via a series of drilled holes. Cartridge heaters are manufactured in two basic forms – high density and low density.
High density cartridge heaters are used to heat plastic injection moulds, dies, platens and so forth, whereas low density cartridge heaters are more suitable for packing machinery, heat sealing, labelling machines and hot stamping applications.industrial heater
Cartridge heaters
Resistance heating wire
NiCr 80/20 wire
sheath
stainless steel 304,321,316, Incoloy 800, Incoloy 840
Maximum temperature
800 degree Celsius
Wattage Tolerance
+5%, -10%
Resistance tolerance
+10%, -5%
Voltages available
380V,240V, 220V,110V,36V,24V or 12V
Length tolerance
±1 mm
Diameter tolerance
-0.02mm
Standard Cold Zone
5-10mm
Insulation resistance (cold)
≥ 500 MΩ
Maximum leakage current (cold)
≤ 0.5 mA
-
CMT Carbide-Tipped Drive Center
4545
Part Name:Carbide-Tipped Drive Center
Texture:Cemented Carbide or SKD11+ Cemented Carbide
Corollary Equipment:CMT Cylindrical Grinder
Major Parameter:
- Critical Dimensional Accuracy:±002
- Run Out:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
CMT Carbide-Tipped Tailstock Center
7485
Part Name:Carbide-Tipped Tailstock Center
Texture:Cemented Carbide or SKD11+ Cemented Carbide
Corollary Equipment:CMT Cylindrical Grinder
Major Parameter:
- Critical Dimensional Accuracy:±002
- Run Out:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
IC Injection Nozzle
Part Name:IC Injection Nozzle
Texture:Cemented Carbide
Corollary Equipment:IC Injection Mould
Major Parameter:
- Critical Dimensional Accuracy:±002
- Cylindricity:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
IC Injection Pushrod
Part Name:IC Injection Pushrod
Texture:Cemented Carbide
Corollary Equipment:IC Injection Mould
Major Parameter:
- Critical Dimensional Accuracy:±002
- Cylindricity:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
IC Injection Pushrod
Part Name:IC Injection Pushrod
Texture:Cemented Carbide
Corollary Equipment:IC Injection Mould
Major Parameter:
- Critical Dimensional Accuracy:±002
- Cylindricity:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
IC Stamping Knife
0205
Part Name:IC Stamping Knife
Texture:Cemented Carbide
Corollary Equipment:IC Made
Major Parameter:
- Critical Dimensional Accuracy:±002
- Planeness:002;
- Parallelism Tolerance:002;
- Smooth Finish:Ra0.05-0.10。
-
KMT Internal Grinder Spindle
9635
Part Name:Internal Grinder Spindle
Texture:Cemented Carbide
Corollary Equipment:KMT Internal Grinder or UVA Internal Grinder
Major Parameter:
- Critical Dimensional Accuracy:±005
- WorkingSpeed:100,000rpm
- Run Out:002;
- Minimum Internal Thread:M2;
- Smooth Finish:Ra0.05-0.10。
-
Nissin Honing rod
7867
Part Name:Nissin Honing rod
Texture:Cemented Carbide or SKD11+ Cemented Carbide
Corollary Equipment:Nissin Honing Machine
Major Parameter:
- Critical Dimensional Accuracy:±002
- Run Out:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。