-
Bahmueller Internal Grinder Spindle
7862
Part Name:Internal Grinder Spindle
Texture:Cemented Carbide
Corollary Equipment:Bahmueller Internal Grinder or GMN Spindle
Major Parameter:
- Critical Dimensional Accuracy:±005
- WorkingSpeed:100,000rpm
- Run Out:002;
- Minimum Internal Thread:M2;
- Smooth Finish:Ra0.05-0.10。
-
Carbide IC Injection Pushrod
Part Name:IC Injection Pushrod
Texture:Cemented Carbide
Corollary Equipment:IC Injection Mould
Major Parameter:
- Critical Dimensional Accuracy:±002
- Cylindricity:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
Carbide IC Injection Pushrod
Part Name:IC Injection Pushrod
Texture:Cemented Carbide
Corollary Equipment:IC Injection Mould
Major Parameter:
- Critical Dimensional Accuracy:±002
- Cylindricity:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
Carbide IC Injection Pushrod
Part Name:IC Injection Pushrod
Texture:Cemented Carbide
Corollary Equipment:IC Injection Mould
Major Parameter:
- Critical Dimensional Accuracy:±002
- Cylindricity:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
Carbide IC Injection Pushrod
Part Name:IC Injection Pushrod
Texture:Cemented Carbide
Corollary Equipment:IC Injection Mould
Major Parameter:
- Critical Dimensional Accuracy:±002
- Cylindricity:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
Carbide KMT Internal Grinder Spindle
Part Name:IC Injection Pushrod
Texture:Cemented Carbide
Corollary Equipment:IC Injection Mould
Major Parameter:
- Critical Dimensional Accuracy:±002
- Cylindricity:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
Carbide KMT Internal Grinder Spindle
Part Name:IC Injection Pushrod
Texture:Cemented Carbide
Corollary Equipment:IC Injection Mould
Major Parameter:
- Critical Dimensional Accuracy:±002
- Cylindricity:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
Carbide KMT Internal Grinder Spindle
Part Name:IC Injection Pushrod
Texture:Cemented Carbide
Corollary Equipment:IC Injection Mould
Major Parameter:
- Critical Dimensional Accuracy:±002
- Cylindricity:002;
- Out Of Roundness:0008-0.0010;
- Smooth Finish:Ra0.05-0.10。
-
Cartridge heater
Cartridge heater is a piece of equipment, made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr2080), High temperature leads, seamless stainless steel sheath(304,321,316,800,840). usually in tube form, that is used in heating applications by way of insertion into metal blocks via a series of drilled holes. Cartridge heaters are manufactured in two basic forms – high density and low density.
High density cartridge heaters are used to heat plastic injection moulds, dies, platens and so forth, whereas low density cartridge heaters are more suitable for packing machinery, heat sealing, labelling machines and hot stamping applications.industrial heater
Cartridge heaters
Resistance heating wire
NiCr 80/20 wire
sheath
stainless steel 304,321,316, Incoloy 800, Incoloy 840
Maximum temperature
800 degree Celsius
Wattage Tolerance
+5%, -10%
Resistance tolerance
+10%, -5%
Voltages available
380V,240V, 220V,110V,36V,24V or 12V
Length tolerance
±1 mm
Diameter tolerance
-0.02mm
Standard Cold Zone
5-10mm
Insulation resistance (cold)
≥ 500 MΩ
Maximum leakage current (cold)
≤ 0.5 mA
-
Cartridge heater
Cartridge heater is a piece of equipment, made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr2080), High temperature leads, seamless stainless steel sheath(304,321,316,800,840). usually in tube form, that is used in heating applications by way of insertion into metal blocks via a series of drilled holes. Cartridge heaters are manufactured in two basic forms – high density and low density.
High density cartridge heaters are used to heat plastic injection moulds, dies, platens and so forth, whereas low density cartridge heaters are more suitable for packing machinery, heat sealing, labelling machines and hot stamping applications.industrial heater
Cartridge heaters
Resistance heating wire
NiCr 80/20 wire
sheath
stainless steel 304,321,316, Incoloy 800, Incoloy 840
Maximum temperature
800 degree Celsius
Wattage Tolerance
+5%, -10%
Resistance tolerance
+10%, -5%
Voltages available
380V,240V, 220V,110V,36V,24V or 12V
Length tolerance
±1 mm
Diameter tolerance
-0.02mm
Standard Cold Zone
5-10mm
Insulation resistance (cold)
≥ 500 MΩ
Maximum leakage current (cold)
≤ 0.5 mA
-
Cartridge heater
Cartridge heater is a piece of equipment, made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr2080), High temperature leads, seamless stainless steel sheath(304,321,316,800,840). usually in tube form, that is used in heating applications by way of insertion into metal blocks via a series of drilled holes. Cartridge heaters are manufactured in two basic forms – high density and low density.
High density cartridge heaters are used to heat plastic injection moulds, dies, platens and so forth, whereas low density cartridge heaters are more suitable for packing machinery, heat sealing, labelling machines and hot stamping applications.industrial heater
Cartridge heaters
Resistance heating wire
NiCr 80/20 wire
sheath
stainless steel 304,321,316, Incoloy 800, Incoloy 840
Maximum temperature
800 degree Celsius
Wattage Tolerance
+5%, -10%
Resistance tolerance
+10%, -5%
Voltages available
380V,240V, 220V,110V,36V,24V or 12V
Length tolerance
±1 mm
Diameter tolerance
-0.02mm
Standard Cold Zone
5-10mm
Insulation resistance (cold)
≥ 500 MΩ
Maximum leakage current (cold)
≤ 0.5 mA
-
Cartridge heater
Cartridge heater is a piece of equipment, made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr2080), High temperature leads, seamless stainless steel sheath(304,321,316,800,840). usually in tube form, that is used in heating applications by way of insertion into metal blocks via a series of drilled holes. Cartridge heaters are manufactured in two basic forms – high density and low density.
High density cartridge heaters are used to heat plastic injection moulds, dies, platens and so forth, whereas low density cartridge heaters are more suitable for packing machinery, heat sealing, labelling machines and hot stamping applications.industrial heater
Cartridge heaters
Resistance heating wire
NiCr 80/20 wire
sheath
stainless steel 304,321,316, Incoloy 800, Incoloy 840
Maximum temperature
800 degree Celsius
Wattage Tolerance
+5%, -10%
Resistance tolerance
+10%, -5%
Voltages available
380V,240V, 220V,110V,36V,24V or 12V
Length tolerance
±1 mm
Diameter tolerance
-0.02mm
Standard Cold Zone
5-10mm
Insulation resistance (cold)
≥ 500 MΩ
Maximum leakage current (cold)
≤ 0.5 mA